Wire drawing and drawing of steel of Ø1.00 to 12.00 mm in bars and coils

The TRÉFILERIE PÉRILLAT produces bars and coils of bar-turning steel for all industrial activities in France and in Europe.

Tested technology

We have been using proven technology for 130 years. This allows us to produce steel with a round or profiled section (bar or coil) thanks to cold deformation of rough parts.

Our products are suitable for automatic lathes such as Escomatic, Eubama and Transfert machines.

We can also re-drawn the material into coil, straighten it and cut it to length.

Technical characteristics of our wire drawings

Wire drawing of steel From 1.00 to 12.00 mm
PackagingBars or coils
Automatic lathes Compatible
Tolerances h9 – h8 – h7 – h6

Steel grades available

S300 → 11SMn37
S300Pb → 11SMnPb37
S300Pb Bi+Se → 11SMnPb37+Bi+Se

11SMnPb37Light (Pb < 01)
Conforme REACH

S250 → 11SMn30
S250PB → 11SMnPb30
S250PbBi+Te → 11SMnPb30+Bi+Te

45S20 → 46S20
45S20Pb → 46SPb20
60S20Pb+Bi+Te → 60SPb20 +Bi+Te

XC18Pb → C15Pb
XC38Pb → C35Pb

A37Pb → C10Pb
A60Pb2 → C35Pb

16Mc5S → 16MnCrS5
50CV4 → 51CrV4
100C6 → 100Cr6

Wide range of screw-cutting stainless steel

AISI 303 (1.4305)

AISI 303CU (1.4570)

AISI 316L (1.4404)

AISI 304L (1.4307)

Fast delivery in France and Europe

We deliver our products in France and Europe in several types of packaging:

Specific packaging on turets from 300 to 1,000 kg

Specific packaging on pallets from 500 to 600 kg

Specific packaging on supports from 300 to 1,000 kg

Individual strapping of each coil from 30 to 250 kg

Specific packaging in bar form